-
Heavy duty steel construction
-
Standard working height: 30"
-
Standard length: 3'6" to 40'8" (for wall height)
-
Table width: 8' (for wall length)
-
Manually adjustable rake side, 0 to 12/12 pitch on Rake Wall
Table
-
Specialty Wall Table has two parallel sides with
pivot center for building rake walls if desired
-
Cast iron stud location flippers on the fixed side and steel
pins are adjustable on the rake side. Stud locators
are counterbalanced and retract when studs or
components are placed on them.
-
Drum
switch on each end of the table for wall height
adjustment and for wall panel clamping and squaring
-
Power height adjustment and clamping, 16 ½ ft. of travel
-
Heavy duty table top on each side of the table
-
Adjustable squaring stops for walls not starting at neutral,
in ¼" increments up to 12"
-
Rack and pinion gears operated by an electric motor with brake,
gear box, and torque limiter for clamping and
squaring the wall panel. Includes a blow-by to keep
track clear of debris
-
Continuous squaring lip for precision squaring of wall panels
-
Leveling bolts on legs for table leveling
-
Automatic or Manual Tool Dollies with 2 nailing tools on the
straight side of the table Rake Wall Table. Two Tool
Dollies are recommended for the Specialty Wall
Table. The Tool Dollies fasten 2 X 4, 2 X 6 and 2 X
8 studs. One quick-connect coupler is mounted on
the dolly for an optional hand held tool
-
Center floor grates are approximately 8 ½" high
-
Adjustable center support bars, one with stud
locators
-
Pop-up
Rollers for material transfer
