TRIAD

The Laserwall System allows panel producers to cut set-up time by utilizing engineering files to generate a full scale laser image of a desired panel onto a specially designed Triad framing table. The image is positioned against the squaring stop each and every time eliminating the need to worry about adjustments for the first stud. Rough openings are quickly identified and placed into position on the table. Clamp, square, fasten, and remove the finished product. Can be used in-line with other standard Triad products such as routing and sheathing stations for greater productivity.
Available System Configurations

Single Projector

Capable of projecting an image up to 20’ high X 20’ in length

Multiple Projector

Capable of projecting a continuous image up to 20’ high along the length of the table

Key System Features Software

Windows 2000 Professional user interface
Compatible with all major engineering design software
Customized user interface
Accurate to within +/- 1/16 inch
Calibration on command (less than 10 sec)
Project entire wall panel
Projects plates only, studs only, or any
combination
Auto save current wall panel if main power failure
Focus on attention
Move/Rotate image
Mirror or Flip Image
Display plate and component identifier text

Hardware

Wireless remote control (Zone controlled)
Environmentally sealed projector housing
Smart projector (imbedded CPU)
Standard Ethernet network interface
5mW Class IIIa Laser Diode
Compliant with CDRH (21 CFR1040.10)
Pentium III user interface computer
Industrial computer enclosure keyboard & mouse
Constant voltage UPS
300 VA (2.5amps) @ 60Hz for computer
150 VA (1.25amps) @ 60 Hz per projector
24/7 support