Triad's Framing Station is made up of two basic components: the Gen II Framing Table and the Gen II Stud Stitcher Bridge or the Auto Dolly.  The Gen II Framing Table is custom built from 12' to 80' long is provided in widths from 3'9" to 16'.  Studs and plates are placed between cast iron, counterbalanced stud locators and with just a push of a button, the width adjustment clamp is activated to clamp and square all components.  Next, the operator guides the Stud Stitcher Bridge over the clamped all and aligns the laser pointer with the stud.  The Stud Stitcher then clamps the stud horizontally and vertically and places four nails simultaneously in precisely the correct location, fastening both the plates and stud.  The process is repeated by either utilizing the optional joystick control or by manual operation, moving the bridge down the line until the entire wall is fastened.  The operator then presses the optional automatic return and the bridge returns to its park position while the operator rolls the completed wall section to the next station in line.

MACHINE EFFICIENCY

• All bridge operations accomplished from a single control by a single operator

• Will operate on either 2" x 4" or 2" x 6" walls

• Automatic sensor for 2 or 3 nail positions.

OPTIONAL FEATURES

• Joystick operation for all framing functions

• Laser pointer for safe, sure fastener locations

• Automatic bridge return to the park position

*All specifications are subject to change without notice*