The Triad Floor
Builder System is designed to be a state-of-the-art
single-table floor system. The system accommodates
2" x 8" - 2" x 12" dimensional lumber, floor trusses,
and I-joists either width or length-wise within the
table. The system includes a framing table, material
bridge, and nailing/decking bridge which can be
out-fitted with either nails or screws. The table can
jig decks up to 16' in length or tables can be built in
16' increments from the base size up to 80' in length.
Decks can be framed up to 16' in width (custom sizes are
available upon request).
BRIDGE SPECIFICATIONS:
-
Bridge Widths: 9' 2" to 16' 2".
-
Standard Hand Crank Control for Bridge Movement.
-
Push Button Controls located on Bridge Control Panel.
-
Optional Joystick Control for bridge drive, tool firing and tool
shift.
-
Optional Automatic Bridge Return.
-
Optional Laser Pointer for positioning the Bridge at stud and
component locations.
-
Nail
guns mounted standard for deck fastening (Optional
mounting of screw guns)
-
Tool
Bar #1: Decking guns mounted standard 12' on center
shift to 6" on center (optional oc spacing available)
-
Tool
Bar #2: Manually adjustable decking gun spacing (for
decks built length of table)
-
Optional Rim Fire at 6" on center to fasten decking
to top and bottom rim
FRAMING
SPECIFICATIONS: Dimensional lumber width
of system only
-
Three pneumatic nailing tools on each side of the bridge for
framing 2" x 8", 2" x 10", and 2" x 12" joists.
Four nails are fired in 2" x 8" floors, five into 2" x 10" floors, and into 2" x 12" floors.
-
Down clamping pads are designed to clamp and flush the joists to
the rims. Clamping pressure is 314 lbs. and
activates simultaneously with tool firing
activation.
-
Clamp senses 2" x 8", 2" x 10" or 2" x 12" joists for automatic
setting of nail pattern.
MATERIAL HANDLING BRIDGE SPECIFICATIONS:
-
Bridge Widths of 9'2"
to 16'2"
-
4' wide platform area
to hold decking
-
Variable speed 1/2 hp
dc drive
-
Slide down arms to flip
decking material
-
Standard joystick
control for bridge drive
-
Automatic bridge return
OPERATIONAL ACCESSORY ITEMS AVAILABLE:
*All
specifications are subject to change without notice*
