Triad's Template Stair Router was designed to provide years of rugged service with simple operation in mind.  An operator can load two 2"x12" stringers, set up the adjustable rise, run and nose clearance quickly, and start routing!  Two heavy duty 3 ¼ HP, single phase routers will cut the top or bottom stringer only, or both stringers simultaneously with the template guided stair profiles.  Triad's TSR can accommodate standard profiles, no riser profiles and split stringer configurations.  Mechanically aided material indexing, quick changing templates and composite followers, makes the TSR a machine for any shop.

Machine Specifications:

• Shipping Weight:  1200

• Dimensions: 7'W x 7'L x 6'H

• Air Supply: 3 CFM 100psi, ½" dedicated line

• Electrical: 120VAC 40 AMP

• Tread: 7" run x 5 ½" rise to 12 ½" run x 9" rise

• Nose Extension: 0" or ½" to 2"

• Tread Thickness: 1" to 1 ¾"

• Stringer Material: ¾" x 10", ¾" x 12", 2"x10" and 2"x12"

• No Riser: Bolt on Fixture

• Bit Size: ½" to 1" Diameter Straight Flute Right Hand Standard

*All specifications are subject to change without notice*