Triad / Ruvo - Contact Us for Parts, Sales, and Service Triad/Ruvo - Experience You Can Trust Ruvo - The Industry standard in Window and Door Components

Home Page | History | Financing | Wood Wall Panel Products | Steel Wall Panel Products
Steel Truss Equipment | Stair Equipment | Door Equipment | Window Equipment
Drawer Machine | Pallet Table | Software | Trade Shows
Lockstraps - Hinge Protectors | Customer Support | Contact Us


RUVO 9700 Door Lite Cutter

Ruvo 9700 Door Lite Cutter

The Ruvo 9700 Door Lite Cutter series machines are manufactured to last under heavy use and are the finest available to competitive and wood door suppliers.  The heavy duty, easily operated cantilever cutting arm is key to the model's speed and efficiency.  After the lite template and door are pneumatically clamped, its arm then follows the template edge as an oscillating ½" cutter bores through the door.  The optional lock and latch boring and faceplate mortising features provide complete door machining center capabilities at an exceptionally low cost.

PRECISE CUTTING
The 9700 series is equipped with a fully adjustable vertical oscillating bit which prolongs overall bit life.  Bit replacement and machine downtime are both reduced, thereby saving cost.

QUALITY CONTROLS
The 9700 control box provides the operator with exceptional versatility allowing independent operations for special house orders.

AVAILABLE MODELS
9710 Cuts custom lites in steel and wood doors
9712 Model 9710 with face boring added (no latch or faceplate)
9713 Model 9710 with face boring and latch boring added (no faceplate)
9715S Model 9710 with boring for lock, deadbolt and latch and mortising for rectangular faceplates for steel edged doors.
9715W Same as Model 9715S except for wood edged doors.  Handles drive in  bolts.
9715SW For both steel and wood edged doors using interchangeable bolt on  units.

SPECIFICATIONS:
Max Door Size Door height 7' (8' optional)
Door width 3' (4' optional)
Max Lite Sizes  In 3' door 30" x 60" or 24" x 66"
Lock Sizes  Standard  1 ½, 1 5/8, 2 1/8
Deadbolt Sizes  Standard  1 ½, 1 5/8, 2 1/8
Corner Radius  Standard  ¼" (both lite and faceplates)
Backset  Switch Selected 2 3/8 and 2 ¾
Electrical  Standard  460 or 208 Volts, 3PH, 30 Amps
Optional  220 Volts, 10 Amps - 575 Volts, 30 Amps
Air Requirements .30 CFM at 90 PSI
80-100 PSI at machine with 3/8" feeder air line
Model 9710 .21 CFM at 90 PSI
Machine Size  90"L x 56"W x 67"H
Shipping Weight 1400-1950 pounds approximately

*All specifications are subject to change without notice*


TRIAD / MERRICK MACHINE CO.
P.O. Box 130 - Alda, NE 68810
(800)568-7423 ext.133 - FAX (308)384-8326
Copyright © 2005 by Triad Merrick Machine Co. - All Rights Reserved