The
RUVO 9600
is a multiple purpose machine with the
capacity to cut any configuration of lites
as well as lock prep functions. The
automatic rectangle lite feature may allow the
operator to perform other duties while the
door is being cut, such as preparing the
next door for processing-removing finished
cut-outs for disposal-application of
hinges-application of bottom weather strip,
etc. The 16 combination preset rectangular lite sizes enable the Ruvo 9600
to cover most all lite cutting needs without
adjustments, virtually eliminating
changeover time.
The automatic edge prep features reduce
operator strain and fatigue. The vacuum
and debris blow-off systems produce a
cleaner dust free environment.
The Ruvo 9600
can handle a side lite as small as 12" to
24" wide and door sizes up to 24" wide and
8' long.
PRECISE CUTTING
The Ruvo
9600 is equipped with
a fully adjustable vertical oscillating bit
which prolongs overall bit life.
AUTOMATIC LITE
CUTTING
The Ruvo
9600 comes with 4
width and 4 height preset rectangular lite
sizes (accommodates peepholes).
AUTOMATIC EDGE PREP
Edge prep is
completed by a push of one button for a
completely automatic operation.
SPECIFICATIONS
Max Door Size
Door Height 8'0"
Door Width 24" to 48"
Lock Bore Sizes Standard 1 ½, 1 5/8, 2 1/8
Dead Bolt Sizes Standard 1 ½, 1 5/8, 2 1/8
Corner Radius Standard ¼" (Lites and Face
Plates)
Backsets Standard 2 3/8 and 2 ¾
Electrical 230/460 VAC, 3PH, 30 Amps
Optional 220 Volt, 10 Amps 575 Volt, 30
Amps
Air Requirements 1.0 CFM at 120 PSI
*All
specifications are subject to change without
notice*